The appeal and worth of hardwood floors last a lifetime, but they need to be cared for regularly to keep their shine. Performing wood floor screening and recoating is one of the finest techniques to preserve the look and longevity of your flooring. For homes, this approach is fast and affordable since it may restore the finish of your hardwood floors without requiring a whole sanding session.
Preparing the Surface of the Floor
- Your floor surface has to be properly prepared before you begin the screening and recoating procedure. For best outcomes, follow these procedures:
- Sweep or vacuum the whole area to get rid of trash, dust, and grime. This guarantees no particles will become caught during the recoating process, thereby leaving your floors smooth.
- After that, use a dry mop to collect any leftover dust or small particles that may have settled down. Before moving on with any more actions, ensure your floors are entirely dry.
- Empty the space of all things and furniture. This will offer you unobstructed access to every part of your ground. All the space should cover with it.
- Deep marks could warrant treatment before putting a new finish on. This help to maintain the new look of your resident.
Finishing New
Applying a new finish is quite essential during wood floor screening and recoating. Here is how to do it:
- The desired look and toughness depend on your choice of finish. Depending on your floor’s needs, you may choose from a variety of finishes, from oil-based to water-based.
- Apply a uniform layer of finish across the whole surface using a roller or applicator pad. To prevent walking on freshly placed finish, start at one corner of the room and work your way toward the exit.
- Walk on the surface only when the finish has dried completely. Depending on the kind of finish, this could take anywhere from a few hours to a whole day.
Keep Floor Appearance
Sweep or vacuum often to keep your floors clear of dirt, dust, and debris. This will save the integrity of the finish and stop any scratches. Excess water might harm the finish on your hardwood floor. Mopping should be done with as little water as possible and spills should be cleaned right away. Rugs and mats should be placed at entrances to help to limit the dirt and debris tracked onto the floor. This will assist in reducing the wear and tear on your finish.
